this saw came quickly in the mail well packaged in arrived in good shape ,i bought the saw to rip logs its been very reliable ,took 2 pulls to start the saw out of the box i tuned the saw rich for a couple tanks for a break in period and tuned it a little leaner after that and it runs great has very little vibration and has a ton of power,will pull the 36 inch bar with ripping chain through a log without the rpms going doing at all the only things i have done with this saw was retighten the bolts for the for rear handle and main handle i have ran about 30 tanks of gas through the saw and overall i am very impressed i would recommend this saw for anyone looking to cut down alot of big trees or rip logs /chainsaw mill i give this product 5 stars recommended

I ordered the 36 inch bar and 3 chains everything came very quickly in the mail ,was well packaged and had no shipping damage i have been using the semi chisel ripping chain and its been very good, stretched twice and then never stretched after that. it sharpens well and holds an edge for a long time too . i havent used the other 2 chains i can add a review later when i try them overall i give everything 5 stars the price ,quick shipping, and performance was all excellent i would recommend this product to anyone

Powersaw arrived quickly paid for faster shipping and got it 9 days. Box was in excellent shape, plenty of packing to keep it safe. Everything I ordered was in the box minus the bar. Fired up after 4 to 5 pulls on choke and ran after 2nd pull after choke off. Carb adjustments seem decent from the factory, oils the 28 bar just fine, The full wrap is very sturdy, plastics seem to be good quality as well. Very pleased!

This thing is a beast! Starts quick, runs good. Probably needs a carb adjustment, but out of the box it does the job. I have cut 14 trees, and de-limbed them without an issue. The compression release is a dream, you will know quick if you forget to press it. Shipping was very fast ( USA stock ), 2 days!. It did have a leak at the fuel cap due to a bend in it, and the bar tensioner was really stiff. I messaged the company and the service was very responsive. Even asked if everything else was good. They sent the replacement parts without issue. So far, I am very pleased with this. Thank you!

The G888 is a very good saw, I'm small and old ,but I can handle the saw. I used 4 tanks of fuel, that is 1.3 US gal. or 5 liters to those that use that measurement . This is a gentle break in , I did some cookie cutting, and took care of a tree that the snowstorm had pushed over. In the pictures there is the ms 070, G888 and G660

This 42'' bar is a very good option when there is no Sugihara available. The Sugihara is shorter than the Holzfforma ,but is labeled 42'', 40'' is more correct. I highly recommend the Holzfforma bar.

As good of quality as a OEM at a way better pice! Does the trick

Seems to be a well made saw .

I’ve never owned another chainsaw mill so I can’t make and comments comparing this to other brands. I can say that I can’t see how this could be much better. I’m adding a winch to mine to help pull it through logs, but it’s not absolutely essential to use this mill. I’d buy it again for sure if I needed to.

Not to happy with the chainsaw when it arrived damaged.

Hi quality...

Well I ordered the 92cc 660 saw from Holtzfforma and I got it two weeks ago. When I opened the box the chain break handle was broken and the saw was bent. Over the next two weeks of correspondence with Farmer Tec/Holtzfforma have been a nightmare with zero resolution. They do not back up their warranty and refused to pay any shipping back, even though it's on their warranty page stating they do. This was my 3rd saw bought from them, and I assumed I would be covered. Beware when buying from Holtzfforma, they do not back up their products. I would have given zero stars because they refused to pay any shipping cost back to China.

Well I ordered the 92cc 660 saw from Holtzfforma and I got it two weeks ago. When I opened the box the chain break handle was broken and the saw was bent. Over the next two weeks of correspondence with Farmer Tec/Holtzfforma have been a nightmare with zero resolution. They do not back up their warranty and refused to pay any shipping back, even though it's on their warranty page stating they do. This was my 3rd saw bought from them, and I assumed I would be covered. Beware when buying from Holtzfforma, they do not back up their products. I have added a photograph showing the broken saw out of the box. I would give them zero stars based on their refusal to pay for any return shipping, but the lowest you can go is 1 star.

Was surprised how quickly it arrived, ordered on Jan 29 was delivered just over three weeks. An extra $20 for customs charged by UPS. Was in perfect condition upon arrival. Full wrap handle didn’t quite fit perfectly but otherwise very happy with initial inspection. Added fuel and on the fourth or fifth pull it fired up, had no issues with idling. Did a few heat cycles (half a litre of fuel worth) then added more fuel and started cutting cookies. I have a 25” bar installed and am very impressed with the performance so far. I’ll be buying more of these saws!

Need a tracking number need to find my chainsaw please you guys told Couple days

Problems with this part, fuel cap doesn't fit. Threads in tank are at the wrong angle. OEM and Farmertec caps were tried as shown in the photos, they wont seal. Customer service is very different than US companies, I will leave it at that.

Saw arrived damaged, cracked on the lower crankcase, as well as the oil fill hole from shipping damage. Didn't notice it until it started leaking bar and chain oil all over the floor. Saw itself started right up and ran excellent. There absolutely wasn't any customer support, just the blame game between the seller and SF express shipping service. I could of shipped it back... at a cost almost triple the price of the saw itself... it just wasn't economically feasible...

I absolutely love these saws. I purchased out of curiosity and the blew my mind. They allow me to enjoy OEM design at a much better price. These things hold up very well. There is a very short list of things that could be improved or replaced, but I have yet to need to. They say that you get what you pay for, but in this case, you get way more!

I am VERY impressed with my 372xp. Out of the box, installed the big bore kit. Tons of power, fun to run, and super reliable so far. The chain tensioner was a bit gritty, but works. Went ahead and replaced with a Husqvarna 372 OEM tensioner. Well worth the money.

Well I guess I best .after 40 hours there on of milling with 42 inch this saw has not missed a beat starts easy runs really well . Typical old style motor slow reving but the power is all ways there through the rev range very happy very . To the point I have the g660 and will be buying anouther g070